Floor Stripping & Waxing in Chesapeake, Virginia

Floor Stripping & Waxing in Chesapeake, Virginia

Hard floor care for businesses in Chesapeake and around Hampton Roads, from full VCT strip and wax to regular scrub and recoat and burnishing.

Call for a Free Quote

Get a Free Quote

No obligation. By submitting, you agree we may call, text or email you. Privacy

Floor Stripping & Waxing in Chesapeake

About Floor Stripping & Waxing

Floor stripping and waxing restores hard floors that have gone dull, yellow or scuffed. Vinyl composition tile, the VCT found in many offices, clinics, schools and stores, depends on layers of floor finish to protect it. Over time those layers wear through in walkways, trap dirt and turn cloudy. A full strip and wax removes the old finish down to the bare tile, then lays down fresh coats of sealer and finish. Between strips, a scrub and recoat refreshes the top layers with less work and downtime, and regular burnishing brings back the shine. Our crew handles all three, plus care for LVT and sealed concrete.

Floors in Chesapeake take a beating from the local climate. Sandy grit from parking lots acts like sandpaper underfoot, rain from nor'easters and hurricane season brings water and mud through entries, and summer humidity can slow drying if the work is not planned well. Those conditions wear finish faster at doors, hallways and checkout lines. We work with offices in Greenbrier, medical buildings along Battlefield Boulevard, and schools, churches and stores across Great Bridge, Western Branch and Deep Creek. Many churches and schools book VCT strip and wax in summer when buildings are empty. We also serve Virginia Beach, Norfolk, Portsmouth and Suffolk.

A full strip starts with moving furniture and setting out wet floor signs. We apply stripping solution, let it work, then scrub with a floor machine and pad to break down the old finish. The slurry is picked up with a wet vacuum, and the floor is rinsed and neutralized so the new finish bonds. Once dry, we apply sealer if needed and several thin coats of finish, letting each dry before the next. A scrub and recoat skips the full strip and refreshes the top layers instead. Burnishing uses a high-speed machine to polish the finish and bring back the shine.

Before quoting, we look at your floors in person. We check the type of flooring, the condition of the finish, the square footage, how much furniture needs to move and how traffic flows through the space. From there we recommend a full strip, a scrub and recoat or a maintenance plan, and we schedule the work after hours or on weekends so the floor can dry before people return. Floor care can also be added to recurring cleaning so floors stay on a regular cycle. Call or use the form to schedule floor stripping and waxing in Chesapeake, and we will plan the work around your hours.

Looking for a full-service Chesapeake commercial cleaning company? Our crew handles every service, from nightly office janitorial to floor care, post-construction cleanup and day porters.

Common Questions

Frequently Asked Questions

How often should VCT floors be stripped and waxed?

It depends on traffic and how well the floor is maintained between visits. Busy entries, hallways and checkout areas may need a full strip once or twice a year, while quieter offices can go longer. Regular scrub and recoat and burnishing stretch the time between full strips. During our visit we look at how your finish is wearing and suggest a cycle that keeps the floor protected and looking good.

Can you strip and wax LVT or luxury vinyl plank?

Many LVT floors have a factory wear layer and should not be stripped with the same harsh chemicals used on VCT. Some manufacturers allow a compatible finish, while others recommend only cleaning and gentle scrubbing. We check what you have and follow the manufacturer's care guidance, so the floor is cleaned and protected without damaging the wear layer that keeps it looking new.

How long before we can walk on the floor?

Drying time depends on the finish, the number of coats, the temperature and the humidity, and Chesapeake summers can slow things down. That is why we schedule floor work after hours or over a weekend, so the finish has time to cure before people walk on it. Light foot traffic usually comes first, and furniture goes back once the finish is hard enough. We give you clear guidance on reopening before we leave.

What affects the cost of floor stripping and waxing?

Square footage is the starting point, but the condition of the floor matters just as much. Heavy old finish buildup, stains and damaged tiles take more time to deal with. The amount of furniture to move, the number of finish coats, the type of flooring and after-hours or weekend scheduling also affect the price. We look at the floor in person and quote the service it actually needs.

Service Area

Floor Stripping & Waxing Near Chesapeake

Get a Commercial Cleaning Quote in Chesapeake

Tired of chasing your cleaning company, or need cleaning for a new space? Call or use the form. We will walk your building, write up a clear scope and quote, and start on a schedule that fits your hours.

(757) 885-7503

Or fill out the form and we'll be in touch shortly.

Get a Free Quote

No obligation. By submitting, you agree we may call, text or email you. Privacy